Accessories!

No outfit is complete without accessories! Mine were a mixed of new, old, and borrowed.

Apron – I used a half-yard of fabric which ended up making a rather narrow apron, but it works on me because I’m built about like a telephone pole. If you’re normal-sized, try using ¾ of a yard instead. I might make a wider one in the future. After machine-sewing the hems and edges, I gathered it onto a length of matching double-fold bias tape that I hand-sewed shut.

  • thin brown leather belt from Target
  • straw hat from Fantasyland Costumes – a bit big, but if I cinch down the tie below my bun and pin it, it stays on. I decorated it with a feather and a small fake flower that I found in my craft bin.
  • A straw fan from Fantasyland Costumes helped me deal with August heat in far too many layers. This is a lifesaver, definitely worth the $2.50!
  • cotton kung-fu/china slippers from Fantasyland Costumes. I definitely got what I paid for with these, but they will basically function as foot coverings. They’re standing up remarkably well to the Faire, including mud.
  • “period” drinking vessel- my Dad’s old aluminum Phi Kappa Sigma fraternity tankard
  • medium-sized basket that’s been around since before I was born.
  • necklace – I bought some coral-colored beads at Joann’s and a simple clasp, and made a 1-strand necklace to add some more color to my outfit and matching earrings.
  • I didn’t bother to buy a leather pouch for my money, instead wearing a modern-day travel belt over my petticoat and under the kirtle – it’s accessible from the front slit in the kirtle, and the volume of the gathers keeps the lump from showing.
  • A true Elizabethan would have been scandalized by my lack of stockings. I really don’t care.

The Kirtle

IMG_2146IMG_2144

 

 

 

 

 

 

 

 

A.k.a. the big, challenging, holy-sh*t-I-swear-the-sewing-machine-is-cursed part of this project. Because I’m oddly shaped and didn’t figure that a commercial pattern would be worth the money I drafted this from scratch, using resources from Drea Leed and Missa the Semptress.

On the plus side, it made me dredge up my high school trig and geometry!

  • I used Missa’s (aka. Sempstress) conic block worksheet and Ren Wench bodice pattern and instructions. She is a genius and a wonderful teacher. It took me a long while, two yards of scrap paper, three sheets of posterboard, and a significant amount of masking tape, but I finally got it to basically work. It would be SO much easier with an assistant.
  • Also, it would be really, really worth it to make an interlined muslin if you’re working with expensive fabric or want it to fit well and have time to spare, even once you’ve done Missa’s drafting method. It would probably take $15 of fabric and 2 hours of sewing, and save you from having to do post-facto modifications like I did. You wouldn’t have to worry about lacing holes necessarily, for the muslin you could just punch holes with an awl and immediately follow that up with a ~12 foot length of twine on a yarn needle. Leave a ton of slack in the string, slip it over your head, and then tighten.
  • I used quilting cotton as a lining, two layers of a medium-heavy weight cotton bottomweight fabric as interlining, one layer of my linen-look poly blend fashion fabric, and cable ties for the structure of the bodice. I used six total pieces of boning: one on either side of each row of lacing holes, one slid into each flat-felled side seam, and two on either side of the flat-felled back center seam. In hindsight…don’t use boning in the side seams. It chafes my armpit horribly. I’m considering performing open-seam surgery on this thing to remove the side bones.
  • I sewed all the layers together, turned it inside out….and the back was too small. It needed 1.5 inches more give. I cut the bodice completely into three parts, using two vertical lines parallel to the back seam and about 2 inches from that back seam. Into those open areas I sew a strip consisting of a layer of the green fabric and a layer of the interfacing fabric, and then topstitched those seams.  And it fits! 🙂
  • Bodice ModsIMG_2085IMG_2083
  • If I were to make another bodice, I would lengthen it by about an inch, and give more space within the arm scythe. The front straps dug into my shoulders when I was cutting tomatoes. Missa said that this could also be remedied by using a slight zig-zag stitch when sewing the straps – who knew! 🙂

Skirt

  • I knew I wanted ~3 yards around the hem and ~2 yards or less around the waist. I ended up doing way too much trig and geometry in order to figure out how to make a “flared tube”. I cut it in two pieces – it would be more period to do gores, but let’s face it the fabric was cheap and I wanted the fewest number of seams to sew. I then sewed the two pieces together using french seams, since my fabric frays like nobody’s business. If I ever unearth the pile of scrap paper that I drafted the skirt on I’ll post the math. Yay conic sections!
  • I created a 13-inch deep slit with a facing at the center front of the skirt so that I could get the dress on once the skirt was attached to the bodice. The facing is a 14-inch long, 3 inch wide strip of the kirtle fabric with rounded corners; I finished the edges with a zig-zag overstitch, sewed it to the right side of the skirt, cut it, turned it to the wrong side, and topstitched it to stay in place.
  • Because this lovely poly/rayon linen-look fabric doesn’t wrinkle at all, it also doesn’t iron. In order to neatly hem it and have the hem take up a 3-inch hem allowance, I had to first turn over a ~½ inch section and sew it down, and then fold up the last 2.5 inches of the hem allowance and sew that.

joining the skirt to the bodice

IMG_2081
The hemmed skirt and McGyvered bodice ready to join forces. The front slit of the skirt is pinned shut in this photo.
  • I did the tie-a-string-around-your-waist and have-a-helper-adjust-the-hem-from-the-waist thing. I saw that on a Victorian dress (a blog post to research – something like “Construction of a Victorian Dress – inside and out). I’m not sure if it’s period for Elizabethan, but it seemed like the easiest way to deal with the way that the bodice dips down in the front.
  • Then, I slipped on the bodice and chalked a guideline on the adjusted skirt fabric. I took all that off, spread the skirt on the floor, and filled out that line of chalk. I then put a gathering stitch following just above that guideline – I use the method of trapping a length of twine under a zigzag stitch. I then fussed with the gathering until it was all even and matched the length of the bodice edged it needed to be sewn into, then trimmed it to ⅝ inch from the line I would sew along, and sewed it to the green and two interlining layers of the bodice. I roughly hand-tacked  the waist edge of the skirt to the interlining layers because the %&*^ fabric doesn’t respond to ironing and the layers of gathered and doubled fabric were too thick to pin, and hand-sewed the lining over it.
  • The finished lining
    The finished lining
  • For time management reasons, I wore the kirtle through the first weekend of the faire without sewing in the extra lining panel to cover my expanded bodice hack. I hand-stitched in a square of lining fabric that week.
  • I really like the look of the gathering – it looks almost like the cartridge-pleating that a historical person would have used, but with my lazy level of effort. I don’t think pleats would have turned out as well with this fabric.

fastening

  • Eyelets take me 30 minutes each to do by hand. Mine could definitely be neater, and despite my best intentions they aren’t all perfectly parallel. I learned that my right-handed angle-of-attack with the awl resulted in the hole of the right-hand side of the bodice being closer to the edge than the ones on the left side.
  • I order a “bodice lace” from an online site and it ended up being a cheap shoelace with aglets too thick to fit through my lacing holes. I’m tentatively using a pair of round hiking-shoe laces that fit better, but if I have spare time to fill with crafting at the faire I might loop-braid better laces. (lol nope that didn’t happen)
  • I set up the lacing pattern based on “the zen of spiral lacing” by Jen Thompson at Festive Attyre
IMG_2151
the skirt swirl test – if you want to up the swish factor to Disney princess levels, have your skirt flare to 4.5 or 5 yards around the hem instead of 3.